Cangzhou Huachen Roll Forming Machinery Co., Ltd.
Not only focus on complete a machine but also perfect every detail.
Add to Cart
Electrical 4 + 4 kW Double Layer Roll Forming Machine Wholesale
Machine details
| No | ||
| 1
| Suitable Material | q235 |
| 2
| The width of the raw material | 750/1200mm |
| 3 | Rows of rollers | Upper level: 11Rows Down-level: 12 Rows |
| 4 | Appearance size | 7200*1550*1910mm |
| 5 | Total power
| 4 + 4 KW |
| 6 | The thickness of the raw material | 0.3-0.6mm |
| 7 | Productivity | Upper level: 1-3 m/min Down-level:15-20m/min |
| 8 | Diameter of shaft | ￠70mm |
| 9
| Voltage | 380V 50Hz 3phases |
Machine Roller
Control
1. Manually put colored steel coil into the feeding table.
2, manually press the forward button on the top of the control box, this is the start of the operation of the equipment, until the plate out of the cutting knife part, stop pressing the forward button, press the cutting knife down, cut out the exposed part.
3. Set the number of meters and sheets to be processed on the display screen, adjust the control to the automatic upper part, press the start button, and the device will automatically press the plate
4. After each plate is cut off, manually remove the plate from the cutting edge